Brass series central supp Archivi - Marsili https://www.marsili.it/en/categoria/hydraulic-cylinders/brass-series-central-supp/ Hydraulic steering systems Fri, 17 May 2019 15:03:45 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.1 https://www.marsili.it/wp-content/uploads/2018/10/cropped-timone_56_tr-32x32.png Brass series central supp Archivi - Marsili https://www.marsili.it/en/categoria/hydraulic-cylinders/brass-series-central-supp/ 32 32 CL.0/34N-F.C. https://www.marsili.it/en/catalogo/cl-0-34n-f-c-2/ Fri, 11 Jan 2019 14:50:35 +0000 https://marsili.it/?post_type=product&p=2171 Brass inboard hydraulic cylinder with central support, bronze support and chromium plated stainless steel shaft

L'articolo CL.0/34N-F.C. proviene da Marsili.

]]> The hydraulic inboard cylinder type CL.0-34N-FC is part of the brass series with central fixing.
The cylinder tube is made of brass, a material which has higher resistance to pressure than aluminium.
To facilitate the bleeding of air, inclined bleed screws are installed on top of the cylinder heads.
The piston rod is made of stainless steel, chromed and rectified; the chromium plating in a protected environment guaranties a high quality plating, and an excellent protection against the marine corrosion, combined with a very smooth surface guaranties a long endurance of the seals.
The chromium helps to eliminate at least 30% of the friction caused by the use of seals and its hardness protects the piston rod from accidental scratches which could damage the seals.
The support is made of bronze.
MAIN CHARACTERISTICS
Volume: 339cc
Torque: 217Kgm at 35° of the rudder (with working pressure)
Pressure: 100Bar
Force: 1472Kg (with working pressure)
Stroke: 230mm
Tiller arm radius: 200mm
Piston rod: Diam. 25mm
Cylinder tube: 60mm / 50mm
Ball joint: 18mm
Standard fittings: 3/8″G or 15mm

DOWNLOAD PDF FILE

L'articolo CL.0/34N-F.C. proviene da Marsili.

]]> CL.0/53 F.C. https://www.marsili.it/en/catalogo/cl-0-53-f-c-2/ Fri, 11 Jan 2019 14:38:20 +0000 https://marsili.it/?post_type=product&p=2178 Brass inboard hydraulic cylinder with central support, bronze support and chromium plated stainless steel shaft

L'articolo CL.0/53 F.C. proviene da Marsili.

]]> The hydraulic inboard cylinder type CL.0-53-FC is part of the brass series with central fixing and tie rods.

The cylinder tube is made of brass, a material which has higher resistance to pressure than aluminium.

The tie rods are made of stainless steel.
To facilitate the bleeding of air, inclined bleed screws are installed on top of the cylinder heads.

The piston rod is made of stainless steel, chromed and rectified; the chromium plating in a protected environment guaranties a high quality plating, and an excellent protection against the marine corrosion, combined with a very smooth surface guaranties a long endurance of the seals.

The chromium helps to eliminate at least 30% of the friction caused by the use of seals and its hardness protects the piston rod from accidental scratches which could damage the seals.
The support is made of bronze.

MAIN CHARACTERISTICS
Volume: 530cc
Torque: 340Kgm at 35° of the rudder (with working pressure)
Pressure: Max. 100Bar
Force: 2119Kg (with working pressure)
Stroke: 250mm
Tiller arm radius: 218 mm
Piston rod: Diam. 30mm
Ball joint: 25mm
Weight: 21kg
Standard fittings: 1/2″G or 18mm

DOWNLOAD PDF FILE

L'articolo CL.0/53 F.C. proviene da Marsili.

]]> CL.0/45N-F.C. https://www.marsili.it/en/catalogo/cl-0-45n-f-c-2/ Fri, 11 Jan 2019 14:34:12 +0000 https://marsili.it/?post_type=product&p=2174 Brass inboard hydraulic cylinder with central support, bronze support and chromium plated stainless steel shaft

L'articolo CL.0/45N-F.C. proviene da Marsili.

]]> The hydraulic inboard cylinder type CL.0-45N-FC is part of the brass series with central fixing.

The cylinder tube is made of brass, a material which has higher resistance to pressure than aluminium.

To facilitate the bleeding of air, inclined bleed screws are installed on top of the cylinder heads.

The piston rod is made of stainless steel, chromed and rectified; the chromium plating in a protected environment guaranties a high quality plating, and an excellent protection against the marine corrosion, combined with a very smooth surface guaranties a long endurance of the seals.

The chromium helps to eliminate at least 30% of the friction caused by the use of seals and its hardness protects the piston rod from accidental scratches which could damage the seals.

The support is made of bronze.

MAIN CHARACTERISTICS

Volume: 445cc

Torque: 281Kgm at 35° of the rudder (with working pressure)

Pressure: 100Bar

Force: 1473Kg (with working pressure)

Stroke: 300mm

Tiller arm radius: 260mm

Piston rod: Diam. 25mm

Ball joint: 25mm

Standard fittings: 3/8″G or 15mm

DOWNLOAD PDF FILE

L'articolo CL.0/45N-F.C. proviene da Marsili.

]]> CL.0/78 F.C. https://www.marsili.it/en/catalogo/cl-0-78-f-c-2/ Wed, 01 Aug 2018 22:16:43 +0000 https://marsili.it/?post_type=product&p=2146 Brass inboard hydraulic cylinder with central support, bronze support and chromium plated stainless steel shaft

L'articolo CL.0/78 F.C. proviene da Marsili.

]]> The hydraulic inboard cylinder type CL.0-78-FC is part of the brass series with central fixing and tie rods.
The cylinder tube is made of brass, a material which has higher resistance to pressure than aluminium.
The tie rods are made of stainless steel.
To facilitate the bleeding of air, inclined bleed screws are installed on top of the cylinder heads.

The piston rod is made of stainless steel, chromed and rectified; the chromium plating in a protected environment guaranties a high quality plating, and an excellent protection against the marine corrosion, combined with a very smooth surface guaranties a long endurance of the seals.

The chromium helps to eliminate at least 30% of the friction caused by the use of seals and its hardness protects the piston rod from accidental scratches which could damage the seals.
The support is made of bronze.

MAIN CHARACTERISTICS
Volume: 783cc
Torque: 502Kgm at 35° of the rudder (with working pressure)
Pressure: Max. 100Bar
Force: 2611Kg (with working pressure)
Stroke: 300mm
Tiller arm radius: 260 mm
Piston rod: Diam. 30mm
Cylinder tube: 80/65
Ball joint: 25mm
Ball Joint: 25mm
Standard fittings: 1/2″G or 18mm

DOWNLOAD PDF FILE

L'articolo CL.0/78 F.C. proviene da Marsili.

]]>