Hydraulic steering systems accessories for hydraulic steering gear system https://www.marsili.it/en/categoria/accessories-for-hydraulic-and-electrohydraulic-steering-systems/ Hydraulic steering systems Thu, 16 May 2019 14:38:30 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.1 https://www.marsili.it/wp-content/uploads/2018/10/cropped-timone_56_tr-32x32.png Hydraulic steering systems accessories for hydraulic steering gear system https://www.marsili.it/en/categoria/accessories-for-hydraulic-and-electrohydraulic-steering-systems/ 32 32 28066 https://www.marsili.it/en/catalogo/28066/ Sat, 29 Sep 2018 22:00:00 +0000 https://marsili.it/?post_type=product&p=1928 Fitting 90° 1/4-10 chromed brass

L'articolo 28066 proviene da Marsili.

]]> 90° fitting ¼”G-10 chromed brass.

L'articolo 28066 proviene da Marsili.

]]> 28060 https://www.marsili.it/en/catalogo/28060/ Wed, 19 Sep 2018 15:53:56 +0000 https://marsili.it/?post_type=product&p=1925 Fitting T 12-3/8-12 chromed brass

L'articolo 28060 proviene da Marsili.

]]> The fitting type T 12-3/8”G-12 in chromed brass is used as a junction on systems for which it is necessary to change the direction of the tubing and add helm pumps, power packs or other items which must be integrated on a steering system.

This fitting has two connections for rigid and flexible tube with 12mm external diameter and one connection 3/8”G for eventual junctions or flexible tubing with press fittings.

L'articolo 28060 proviene da Marsili.

]]> 3/8”G https://www.marsili.it/en/catalogo/3-8g-2/ Wed, 19 Sep 2018 15:52:55 +0000 https://marsili.it/?post_type=product&p=1956 Electric by-pass kit

L'articolo 3/8”G proviene da Marsili.

]]> The electric bypass is used specifically on autopilot systems, particularly on sailing vessels.

L'articolo 3/8”G proviene da Marsili.

]]> 1/2”G https://www.marsili.it/en/catalogo/1-2g-2/ Wed, 19 Sep 2018 15:52:45 +0000 https://marsili.it/?post_type=product&p=1954 Electric by-pass kit

L'articolo 1/2”G proviene da Marsili.

]]> The electric bypass is used specifically on autopilot systems, particularly on sailing vessels.

L'articolo 1/2”G proviene da Marsili.

]]> V.E.I.S. ½”G https://www.marsili.it/en/catalogo/v-e-i-s-%c2%bdg-2/ Wed, 19 Sep 2018 15:51:46 +0000 https://marsili.it/?post_type=product&p=1952 By-pass / Antishock / Interception / Exclusion valve

L'articolo V.E.I.S. ½”G proviene da Marsili.

]]> The V.E.I.S. ½”G valve is a special block with 4 connections on each side (4 towards the cylinder and 4 towards the actuating section thus power pack and helm pump).
This valve has 12 screw spindles installed which allow the exclusion, the interception or bypass of multiple parts of the system.
Two max pressure valves are also integrated in the block which have antishock function.
By means of two lateral connections it is also possible to install additional hydraulic equipment (ex: manual pump for emergency).
It reduces consistently the system installation time on board, avoiding the use of many isolation valves, fittings and tubes.

L'articolo V.E.I.S. ½”G proviene da Marsili.

]]> 2bar https://www.marsili.it/en/catalogo/2bar-2/ Wed, 19 Sep 2018 14:35:53 +0000 https://marsili.it/?post_type=product&p=2000 Non return valve / Lock valve

L'articolo 2bar proviene da Marsili.

]]> The 2bar non-return valve is normally used in line both on orbitrol and servo assited systems.
This valve keeps the system full of oil.

L'articolo 2bar proviene da Marsili.

]]> Hydraulic oil https://www.marsili.it/en/catalogo/hydraulic-oil/ Wed, 19 Sep 2018 13:05:04 +0000 https://marsili.it/?post_type=product&p=1911 Hydraulic Oil

L'articolo Hydraulic oil proviene da Marsili.

]]> The hydraulic oil is supplied in bottles of 1 litre and correct viscosity for each type of hydraulic system.
Viscosities available : 5Cst-10Cst-22Cst

L'articolo Hydraulic oil proviene da Marsili.

]]> Rilsan tube 10×2 https://www.marsili.it/en/catalogo/rilsan-tube-10x2/ Wed, 19 Sep 2018 13:03:06 +0000 https://marsili.it/?post_type=product&p=1908 The rilsan tube is used on small systems or for compensation tubing. The tube is easy to install and can be cut in the desired size directly on board during...

L'articolo Rilsan tube 10×2 proviene da Marsili.

]]> The rilsan tube is used on small systems or for compensation tubing.
The tube is easy to install and can be cut in the desired size directly on board during the installation.
This tube can be used only on hydraulic steering systems with low pressure.

L'articolo Rilsan tube 10×2 proviene da Marsili.

]]> Rilsan tube 12×2 https://www.marsili.it/en/catalogo/rilsan-tube-12x2/ Wed, 19 Sep 2018 13:03:00 +0000 https://marsili.it/?post_type=product&p=1910 Rilsan Tube 12x2

L'articolo Rilsan tube 12×2 proviene da Marsili.

]]> The rilsan tube is used on small systems or for compensation tubing.
The tube is easy to install and can be cut in the desired size directly on board during the installation.
This tube can be used only on hydraulic steering systems with low pressure.

L'articolo Rilsan tube 12×2 proviene da Marsili.

]]> Nylon tube 5/16″R7 https://www.marsili.it/en/catalogo/nylon-tube-5-16r7/ Wed, 19 Sep 2018 13:01:31 +0000 https://marsili.it/?post_type=product&p=1922 Nylon tube R7 5/16

L'articolo Nylon tube 5/16″R7 proviene da Marsili.

]]> The nylon tube 5/16”R7 is used for systems of small and medium dimensions.
By means of reusable fittings the tube is easy to install and can be cut in the desired size on board during the installation.

L'articolo Nylon tube 5/16″R7 proviene da Marsili.

]]>