Valves Archivi - Marsili https://www.marsili.it/en/categoria/accessories-for-hydraulic-and-electrohydraulic-steering-systems/valves/ Hydraulic steering systems Fri, 17 May 2019 15:38:37 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.1 https://www.marsili.it/wp-content/uploads/2018/10/cropped-timone_56_tr-32x32.png Valves Archivi - Marsili https://www.marsili.it/en/categoria/accessories-for-hydraulic-and-electrohydraulic-steering-systems/valves/ 32 32 V.E.I.S. ½”G https://www.marsili.it/en/catalogo/v-e-i-s-%c2%bdg-2/ Wed, 19 Sep 2018 15:51:46 +0000 https://marsili.it/?post_type=product&p=1952 By-pass / Antishock / Interception / Exclusion valve

L'articolo V.E.I.S. ½”G proviene da Marsili.

]]> The V.E.I.S. ½”G valve is a special block with 4 connections on each side (4 towards the cylinder and 4 towards the actuating section thus power pack and helm pump).
This valve has 12 screw spindles installed which allow the exclusion, the interception or bypass of multiple parts of the system.
Two max pressure valves are also integrated in the block which have antishock function.
By means of two lateral connections it is also possible to install additional hydraulic equipment (ex: manual pump for emergency).
It reduces consistently the system installation time on board, avoiding the use of many isolation valves, fittings and tubes.

L'articolo V.E.I.S. ½”G proviene da Marsili.

]]> 2bar https://www.marsili.it/en/catalogo/2bar-2/ Wed, 19 Sep 2018 14:35:53 +0000 https://marsili.it/?post_type=product&p=2000 Non return valve / Lock valve

L'articolo 2bar proviene da Marsili.

]]> The 2bar non-return valve is normally used in line both on orbitrol and servo assited systems.
This valve keeps the system full of oil.

L'articolo 2bar proviene da Marsili.

]]> V.B.P.A.-50 https://www.marsili.it/en/catalogo/v-b-p-a-50-2/ Tue, 18 Sep 2018 15:55:16 +0000 https://marsili.it/?post_type=product&p=1950 By-pass / Antishock Valve

L'articolo V.B.P.A.-50 proviene da Marsili.

]]> The valve type V.B.P.A.-50 is a special valve which includes both the bypass valve and the antishock valve.
This block is mainly used for systems with two hydraulic cylinders since the valve has four plugs on each side.

L'articolo V.B.P.A.-50 proviene da Marsili.

]]> 22090 https://www.marsili.it/en/catalogo/22090/ Tue, 18 Sep 2018 10:10:20 +0000 https://marsili.it/?post_type=product&p=1987 Antishock valve / Relief valve

L'articolo 22090 proviene da Marsili.

]]> Antishock valve 3/4″G.

L'articolo 22090 proviene da Marsili.

]]> 22080 https://www.marsili.it/en/catalogo/22080/ Tue, 18 Sep 2018 10:06:57 +0000 https://marsili.it/?post_type=product&p=1985 Antishock valve / Relief valve

L'articolo 22080 proviene da Marsili.

]]> Antishock valve 1/2″G.
This valve is used in line (along the tubing) for protection of the entire system from overpressure (EX.: a shock of the rudder).
Especially used if the system is under approval of a classification society.

L'articolo 22080 proviene da Marsili.

]]> 1667 https://www.marsili.it/en/catalogo/1667-2/ Mon, 17 Sep 2018 15:43:41 +0000 https://marsili.it/?post_type=product&p=2014 Non return valve / Lock valve

L'articolo 1667 proviene da Marsili.

]]> The non-return valve type 1667 is installed on the hydraulic transmitters type C5/18, C5/25A, C5/25, C7/25, C7/37 and C7/45.

L'articolo 1667 proviene da Marsili.

]]> 1216 https://www.marsili.it/en/catalogo/1216-2/ Mon, 17 Sep 2018 15:42:20 +0000 https://marsili.it/?post_type=product&p=2012 Non return valve / Lock valve

L'articolo 1216 proviene da Marsili.

]]> Non return valve (not normally used).

L'articolo 1216 proviene da Marsili.

]]> 16070 https://www.marsili.it/en/catalogo/16070/ Tue, 28 Aug 2018 23:02:01 +0000 https://marsili.it/?post_type=product&p=2001 Synchronization valve 3/8"

L'articolo 16070 proviene da Marsili.

]]> The synchronization valve 3/8” is used for systems on which the two rudders cannot be connected by a mechanical tie bar (for example on catamarans).
This valve is capable of resetting the synchronization of the rudders by making the synchronization manoeuvre thus bringing the hydraulic cylinders to the end of the stroke without having an operator in the steering room to open and close the ball valve so the synchronization can be made directly from the control station.
The valve can be used for all types of systems: manual, electrohydraulic, servo assisted and electronic.

L'articolo 16070 proviene da Marsili.

]]> 16080 https://www.marsili.it/en/catalogo/16080/ Tue, 28 Aug 2018 22:54:01 +0000 https://marsili.it/?post_type=product&p=2002 Synchronization valve 1/2"

L'articolo 16080 proviene da Marsili.

]]> The synchronization valve 1/2” is used for systems on which the two rudders cannot be connected by a mechanical tie bar (for example on catamarans).
This valve is capable of resetting the synchronization of the rudders by making the synchronization manoeuvre thus bringing the hydraulic cylinders to the end of the stroke without having an operator in the steering room to open and close the ball valve so the synchronization can be made directly from the control station.
The valve can be used for all types of systems: manual, electrohydraulic, servo assisted and electronic.

L'articolo 16080 proviene da Marsili.

]]> 1683 https://www.marsili.it/en/catalogo/1683-2/ Wed, 01 Aug 2018 22:16:12 +0000 https://marsili.it/?post_type=product&p=1995 Non return valve / Lock valve

L'articolo 1683 proviene da Marsili.

]]> The non-return valve type 1683 is mainly used as an in line valve to be installed on the tubing.
It can be installed on the tubing of all the steering systems that require this function.

L'articolo 1683 proviene da Marsili.

]]>